FSP Group FSP300-60THN 300W Power Supply
Features
- Complied with ATX12V 2.0 standard
- High efficiency and reliability
- Remote On/Off function
- Internal 12V DC fan included
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Approved by UL 60950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
Specification
- Temperature Range: Operating 0° C ~ +25° C on full load; De-rate 2W/C from +50° C to +25° C;
- storage & shipping -20° C ~ +65° C
- Humidity: 90% on operating and 95% on storage
- Dielectric Withstand: Input to frame ground 1800V AC for 1 second
- Efficiency: 70% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
- Rise Time: Less than 20ms on all output
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Not exceed 3.5mA
- MTBF: 100,000 hours on maximum load at +25° C degree
- Dimension (WxHxL): 150x86x140mm/6”x3.4”x5.5” inches
Input Characteristics
- Input Range: +/-10% of 115 / 230 V, Manual selection
- Frequency: 47~63Hz
- Input Current: 7A (RMS) @115V AC, 3.5A (RMS) @230V AC
- Inrush Current: 80A max cold start, 100A warm measured at 264rms/50Hz
|
